Penny Hydraulics makes light work of cellar loading

By Sarah Ann McCay03 February 2012

Penny Hydraulics has installed two LoadLift platform lifts for Adnams Brewery

Penny Hydraulics has installed two LoadLift platform lifts for Adnams Brewery

Penny Hydraulics installed LoadLift platform lifts into two cellar service vehicles for Adnams, a Southwold, UK-based brewer.

The platform lifts allow engineers to lift and load beer coolers and other equipment into vans without any manual lifting. The lifts also enable engineers to complete maintenance tasks on their own when they visit the brewer's pubs and hotels in East Anglia, where previously two engineers would have been required for each task.

"The coolers are on wheels and typically weigh around 100 kg on their own but if they are clogged up with ice they can weigh a lot more so we needed a device that could cope," said Kyle Horner, cellar services technical adviser at Adnams. "A platform lift seemed to be the best way to get the coolers in and out of the vehicles without any need for manual lifting."

The hydraulic platform lift can handle loads up to 500 kg. It is operated using a wander lead that allows the user to stand clear and with an all-round view of the vehicle and load. The platform extends to the ground for loading and unloading, before lifting into and resting on the vehicle floor. When out of use the platform can be folded up out of the way to leave an unobstructed load space.

As some of Adnams' cellars are below ground Penny Hydraulics also supplied and installed winches so the loads can be raised and lowered between the cellar and ground level.

MAGAZINE
NEWSLETTER
Delivered directly to your inbox, World Crane Week Newsletter features the pick of the breaking news stories, product launches, show reports and more from KHL's world-class editorial team.
Long Reads
Post-pandemic demand lengthens delivery times for construction equipment
Government stimulus measures following the global pandemic have led to a surge in demand for construction equipment
Technology paves the way for driving 3D development
What is 3D modelling and what is it used for? Discover more at SC&RA Workshop
PREVIEW: SC&RA Crane & Rigging Workshop
The 2021 Crane & Rigging Workshop will be held September 14-16 at the Hyatt Regency Chicago, USA
CONNECT WITH THE TEAM
Alex Dahm Editor, International Cranes and Specialized Transport Tel: +44(0) 1892 786 206 E-mail: alex.dahm@khl.com
Mike Posener Sales Manager Tel: +353 860 431 219 E-mail: mike.posener@khl.com
CONNECT WITH SOCIAL MEDIA