Mammoet reveals 6,000 tonne crane

By Alex Dahm20 November 2020

A 6,000 tonne capacity super heavy lift crane has been announced by Mammoet.

Mammoet's SK6,000 is a 6,000 tonne capacity super heavy lift ring crane

Mammoet’s SK6,000 is a 6,000 tonne capacity super heavy lift crane

The Netherlands-headquartered international heavy lift and transport specialist said the SK6,000 will typically be used to lift modules for the construction of FPSO projects, in bigger blocks. These can weigh up to 5,000 tonnes, Mammoet said. It will also be able to handle, for example, a 1,500 tonne, 150 metre tall, flare tower in one piece.

Mammoet said the SK6,000 allows EPCs to build bigger than ever before, with modules lifted directly onto the hull, without a requirement to rotate either the modules on land, or the ship.

The new crane follows the same design as the 5,000 tonne capacity SK350 and the smaller SK190. While it can be erected on a full ring, the required set up area can be reduced by as much as 45 percent by just using a segment of track. This is due to the ballast being located in the centre of the ring and not at the rear on the opposite side of the ring from the boom foot.

Maximum outreach is 144 metres while ground bearing pressure is designed to remain low.

Giovanni Alders, Mammoet sales director, said, “With its long outreach, small minimum footprint and relatively small site impact, the SK6,000 greatly reduces the topside integration time. Needless to say, with larger building blocks you spend less time connecting and testing, and more time producing.”

The news follows the announcement in May 2019 of the world’s largest land-based crane and big brother to all these SK cranes, the 10,000 tonne capacity SK10,000.

Like the other super heavy lift Mammoet cranes this latest one is containerised for shipping.

More news to follow on this new giant as it becomes available.

SK6,000 will be able to lift and place a 150 metre tall flare tower weighing 1,500 tonnes in one piece

SK6,000 will be able to lift and place a 150 metre tall flare tower weighing 1,500 tonnes in one piece

 

fb140a51-d99d-48ed-bc06-75a78f0502e7

 

MAGAZINE
NEWSLETTER
Delivered directly to your inbox, World Crane Week Newsletter features the pick of the breaking news stories, product launches, show reports and more from KHL's world-class editorial team.
CONNECT WITH THE TEAM
Alex Dahm Editor, International Cranes and Specialized Transport Tel: +44(0) 1892 786 206 E-mail: alex.dahm@khl.com
Mike Posener Sales Manager Tel: +353 860 431 219 E-mail: mike.posener@khl.com
CONNECT WITH SOCIAL MEDIA
Latest News
ALL engine shop maximizes uptime
The ALL Family of Companies has developed multiple ways to help ensure that its cranes perform at peak efficiency.
Armstrong Crane expands with Tadano AT
The British Columbia-based company invested in a Tadano ATF 200G-5 to position them for higher capacity jobs.
Liebherr delivers for German army
Final two units of G-BKF series army crane order delivered by Liebherr to German armed forces