G&G transports turbine shaft through winter weather

By D.Ann Shiffler10 March 2021

G&G Specialized Carriers navigated the challenging heavy haul of a 147,400-pound turbine shaft. Using a Manitowoc crawler crane, the shaft was offloaded onto G&G’s transport system at the Port of Milwaukee. The route to the destination was a little more than 100 miles, but it was greatly complicated by below zero-degree temperatures, 12 inches of snow on the ground and high winds.

The gross weight of the turbine shaft was 231,000 pounds.

“The route was 103 miles of pure hell,” said G&G’s Robbie Swan. “Blowing snow, high winds and cars were parked and stalled along the roadway. There were also a lot of tight turns to make.”

Key to success

He said the key to the successful transport was the Faymonville MultiMAX 3+3 single drop trailer.

The loaded-out transport was 94 feet long.

“If we didn’t have this Faymonville single-drop trailer, this trip would have been a flop,” he said.

With a gross weight of 231,000 pounds, the turbine measured 36 feet in length. The loaded-out transport was 94 feet long.

The turbine shaft was sitting within circular saddles that were lashed to the trailer with chains. The duration of the journey was 12.5 hours.

The Faymonville MultiMAX is suited for a variety of heavy haul tasks, said Swan.

“It offers great versatility thanks to a combination of payload capacity, maneuverability, low mobilization costs and a double stretch, allowing flexible spacings between the axle tridems and a total deck length up to 77 feet,” he said. “The vehicle complies with DOT requirements and its fully galvanized frame ensures corrosion protection.”

The 103-mile trip included high winds, a snow storm and sub-zero degree temperatures.

The hydraulic lifting and lowering of the neck allows optimal ground clearance on uneven terrain or when passing railway crossings and other obstacles. While the 3-axle front bogie with caster-steered axles follows the truck, the rear bogie counter steers using state-of-the-art king-pin steering including remote control override, the company said.

This combination ensures an ideal turning radius and helps to manage and enter tight corners and jobsites. Within a length of 53 feet and a width of 100 inches, when closed, it can be mobilized quickly without any escorts or permits. The MultiMAX has a strong chassis design and offers high stability, while keeping the tare weight low, the company said.

MAGAZINE
NEWSLETTER
Delivered directly to your inbox, World Crane Week Newsletter features the pick of the breaking news stories, product launches, show reports and more from KHL's world-class editorial team.
Latest News
Tiong Woon reviews Grove GMK6300L-1
Michael Ang, CEO of Tiong Woon Crane & Transport, gives his views on the company’s Grove GMK6300L-1 all terrain crane
JLG withdraws from Bauma 2022
JLG has pulled out of Bauma 2022, the company announced, and will focus instead on virtual interactions and online collaborations
Winches for robot boats
Palfinger provides winches for Ocean Infinity’s latest autonomous vessels
CONNECT WITH THE TEAM
Alex Dahm Editor, International Cranes and Specialized Transport Tel: +44(0) 1892 786 206 E-mail: alex.dahm@khl.com
Mike Posener Sales Manager Tel: +353 860 431 219 E-mail: mike.posener@khl.com
CONNECT WITH SOCIAL MEDIA